Share this product

Everything you need to stick and release BASF Ultrafuse 316L filament reliably

Magigoo Pro Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Pro Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.

Due to the thermoplastic nature of the filament binding materials and the differential thermal cooling during FDM printing, parts printed BASF Ultrafuse® 316L are susceptible to warp. Furthermore due to the delicate nature of the green part, care must be taken when removing parts printed in BASF Ultrafuse® 316L to avoid part deformation.  Magigoo Metal provides sure and reliable adhesion during printing and enable the easy removal of the printed part through submersion in water, thus avoid potential damage to the green part.

HOW TO USE:

For use of Magigoo Metal with BASF Ultrafuse® 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.

  • Shake the bottle.
  • Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
  • Print according to the filament/printer manufacturers recommendations
  • After printing. Submerse the whole build plate in water or soak around the part with water. After short period of time – generally 30 minutes to 2 hours depending on the size of the part the part should come off on its own or be easy to remove with a gentle twist.
  • Clean any residue – Use a damp cloth to wipe off.

Buy Now
Share this product
3rd September 2020
3D Printing High Temperature Materials
26th August 2020
Essentium launches four 3D printing adhesives in partnership with Magigoo
13th July 2020
3D Printing Flexible Materials - A short guide
26th June 2020
3D Printing with Nylon - Why & How?